12 Years Factory wholesale STEEL BLOCK for UK Importers
Short Description:
Length max. 6.000 mm Width max. 1.800 mm Thickness max. 1.000 mm (in case of smaller thickness greater length and width) Weight max. 30.000 kg
12 Years Factory wholesale STEEL BLOCK for UK Importers Detail:
Length | max. 6.000 mm |
---|---|
Width | max. 1.800 mm |
Thickness | max. 1.000 mm (in case of smaller thickness greater length and width) |
Weight | max. 30.000 kg |
Product detail pictures:
12 Years Factory wholesale STEEL BLOCK for UK Importers, The product will supply to all over the world, such as: , , ,
We are manufacturer,specializing in manufacturing the scourer series products.Our main products: Scourer wire,Scourer machine,Scourer packing machine,and …
This was just a quick check to see if the extreme difference in these steels could be seen on something as simple as a garden hose :
-OTK EDC : k390 at 64 HRC
-Svord : l6 at 54/56 HRC
The end result is not really, both can easily do 100 cuts with little to no obvious difference on fine work. However, and this is the main point of the video, cutting just regular materials without a lot of controls can result in wild deviations.
On one of the runs the Svord hit a piece of grit and the edge was scraped off. If the performance of the steel/knife was judged from that then very misleading conclusions could have been reached. The same random thing could have happened to the OTK either.
As an aside, the sheath on the OTK/EDC is a very fine example of Kydex work.
By from -
By from -