13 Years Manufacturer SQUARE BAR to Eindhoven Manufacturer
Short Description:
Length up to 16,000 mm Size from 140 mm to 460 mm
13 Years Manufacturer SQUARE BAR to Eindhoven Manufacturer Detail:
| Length | up to 16,000 mm |
|---|
| Size | from 140 mm to 460 mm |
|---|
Product detail pictures:
13 Years Manufacturer SQUARE BAR to Eindhoven Manufacturer, The product will supply to all over the world, such as: , , ,
H11 Tool Steel https://www.techsteel.net/alloy/tool-steel/h11
H-11 tool steel is a 5% chromium hot work steel that is characterized by excellent impact toughness
It contains less vanadium than the widely-used H13 tool steel providing for the higher toughness, with some reduction in wear resistance and temper resistance.
H11 tool steel is a deep-hardening, air-hardening steel that exhibits minimal size change during heat treatment.
As a result, H11 tool steel is widely used in the aerospace industry.
H11 tool steel is recommended for hot tooling applications where maximum resistance to cracking is required such as:
● Aircraft landing gear
● Hot punches
● Die casting dies
● Forging dies
● Hot shear blades
● Hot gripper dies
● Extrusion tooling
H11 tool steel is manufactured to 4 AMS specs:
AMS 6437, AMS 6485, AMS 6487, AMS 6488
For more H11 tool steel information visit https://www.techsteel.net
Or call 1-631-223-7638
- From MaintenanceResources.com –
Take the guess work out of how much force is exerted on a sling when making a lift with two or more lifting straps. The angles are not always just 45 or 60 degrees as is often listed on the sling capacity tag. Here is an easy way to figure out if it will be a safe lift.
All you need to know are four things:
1. The rated vertical safe working load of the sling.
2. The total weight of the load.
3. The length of the sling from the hook to the attachment point.
4. The vertical distance from the load to the hook point.
– See over 5000 products at MaintenanceResources.com
By from -
By from -
