2 Years’ Warranty for STEEL PLATE Supply to Vancouver
Short Description:
From 30 x 25 mm to 2.000 x 600 mm (in case of a smaller width correspondingly thicker)
2 Years’ Warranty for STEEL PLATE Supply to Vancouver Detail:
From 30 x 25 mm to 2.000 x 600 mm
(in case of a smaller width correspondingly thicker)
Product detail pictures:
2 Years’ Warranty for STEEL PLATE Supply to Vancouver, The product will supply to all over the world, such as: , , ,
PARTE 2 : https://www.youtube.com/watch?v=5O3–jXFAsY
Full Custom Garage: Episódio 4
Todos Direitos de imagens reservado discovery.
This is one way to cut an internal keyway with a lathe. This is a good option if you need to make an internal keyway but do not have a broach set. In this video I cut a 3/16 square keyway in an aluminum bushing. I used a 1/2″ internal boring bar with a 3/16 HSS tool bit set up in the QCTP. The carriage was used to move the tool bit in and out of the aluminum bushing until the desired dept was reached.
If you liked this video please rate and subscribe.
Music is royalty free from Dread Pirates.
Thanks — TheManFromAlaska
By from -
By from -