2017 China New Design STEEL DISC for Liberia Manufacturers
Short Description:
Diameter up to 1.200 mm (smaller dias correspondingly thicker) Thickness up to 600 mm
2017 China New Design STEEL DISC for Liberia Manufacturers Detail:
Diameter | up to 1.200 mm (smaller dias correspondingly thicker) |
---|---|
Thickness | up to 600 mm |
Product detail pictures:
2017 China New Design STEEL DISC for Liberia Manufacturers, The product will supply to all over the world, such as: , , ,
FLAT BAR/ROUND BAR/SQUARE BAR MANUFACTURING LINE
MAKE:UBE(JAPAN) ETC..
manufacturing YEAR:1972 , revamped “2010
FLAT BAR:4-28mm dia thickness.22-100 width.
ROUND BAR:14-25mm
SQUARE BAR:12.7-23mm
LENGTH OF PRODUCT:4.0-7.5m
CAPACITY : 10 tons /hours for mixed products
40 tons /hour for single products
Billet size : 115 mm x 1320/1610 mm
Reheating furnace Upper 2 zone , pusher type
nominal capa : 20 tonS/H
Fuel LNG, 12 burners, Total calolific value 12800 Mcal/H
make: Hirotiku Japan
Type of mill
Roughing : 3 Hi reversing mill with 3 stands
Intermediate: 2 Hi continuous mill with 2 stands
Finishing: 2 Hi continuous mill with 4 stands
make : Tanaka Gear, UBE steel
Rolling speed max 10 m/sec
Cooling bed 50 x 10 meters Power unit Electrical driven
make :Takigawa Japan
Cold shear
Cantilever down cutting , capa: 200 tons , Blade : 700 mm
Piling system Magnet type
Automatic banding machine
Fuel consumption 60 m2/H
Electrical consumption : 180kwh/T
CAPACITY : 10 tons /hours for mixed products
40 tons /hour for single products
Weight of equipment : 1500 tons
By from -
By from -