2017 New Style STEEL DISC to Brunei Factories
Short Description:
Diameter up to 1.200 mm (smaller dias correspondingly thicker) Thickness up to 600 mm
2017 New Style STEEL DISC to Brunei Factories Detail:
| Diameter | up to 1.200 mm (smaller dias correspondingly thicker) |
|---|---|
| Thickness | up to 600 mm |
Product detail pictures:
2017 New Style STEEL DISC to Brunei Factories, The product will supply to all over the world, such as: , , ,
Sansun Valves & Fittings Co.,Limited
We are a factory of stainless steel valve , pipe, fitting in china more than 9 years.
www.sansun-valve.com
Shanghai Harex Steel Fiber Technology Co., Ltd
Product Description
Harex Mill cut Type Steel Fibers:
Type of Products:Ami04-32-600
Technical Specifications:
1. Length: 32.0mm ± 2.0mm
2. Width: 2.6mm ± 1.2mm
3. Aspect ratio: 35-45
4. Tensile strength: ≥ 700MPa
Physical Features:
Cast flange anti-rust treatment, section is the triangle, coarse intrados, smooth outer surface, radial distortion, and a hook bolt tail at both ends.
Quality Standard: DGJ108-59-2006 CECS38:2004 JGJ/T221-2010 JTG/T F30-2014
Product Features: Raw material of Harex steel fiber adopts high-quality manganese alloys high-strength cast steel, because of its special shape and advanced production technology, so that its effect on the concrete significantly increased, and generally increased 20-50% in compressive strength, flexural tensile strength, abrasion resistance, increased 3-4 times of performance of concrete anti-cracking, raised 1.65-2.25 times of bending fatigue strength, improved 5-10 times of impact strength, toughness enhanced 40-200 times.
Harex mill cut Steel Fiber is suitable for various construction conditions. No special requirements for concrete mixing, equal distribution in concrete, no caking, which brings convenience to modern construction.
By from -
By from -
