Cheapest Factory STEEL SHAFT for California Factory
Short Description:
Barrel/flange diameter up to 1.600 mm Ø Length up to 15.000 mm Weight from 10 kg to 35.000 kg
Cheapest Factory STEEL SHAFT for California Factory Detail:
| Barrel/flange diameter | up to 1.600 mm Ø |
|---|---|
| Length | up to 15.000 mm |
| Weight | from 10 kg to 35.000 kg |
Product detail pictures:
Cheapest Factory STEEL SHAFT for California Factory, The product will supply to all over the world, such as: , , ,
I was able to bend that 7″ length of 1/4″ steel rod, so I had to try a 6″ length! It was WAY tougher! Check out Oldrustystuff for awesome videos on a variety of topics: https://www.youtube.com/user/widerstand **Actual bending starts around 5:15 **
The rings are made of 8mm steel bars. For first two feet keep the distance 6 inches between rings and then carry 9 inch upto the two feets before at the end it means from top and bottom side up to the two feets the distance between the rings should be 6 inches and for rest length you can carry upto the 9 inch. On the other hand you can keep all rings at 6 inches if the building height is more than two stories. The main important point in column formation is distance between the rings. In general 4 of 16mm steel bars with two 10 or 12 mm size steel bars are sufficient but again I tell you it depends on the load calculation.
Here you can see this formation for the house construction.
By from -
By from -
