China Professional Supplier STEEL DISC for Cape Town Importers

DW-400 Threaded Rod Cutter Info – https://www.stainelec.com.au/threaded-rod-cutters.php

Stainelec Hydraulic Equipment introduces the DW-400 manual hydraulic threaded rod cutter. This unit gives the operator the easy task of cutting threaded rod without damaging the thread after completing the cut. This manually operated threaded rod cutter gives the user more flexibility as its designed to be used in factory and on-site environments.

The threaded rod cutter cuts cleanly on both sides of rod enabling nuts to be screwed on either side and produces no sparks when cutting the material.

The DW-400 threaded rod cutter is extremely reliable, powerful and easy to use and has the ability to cut M8, M10, M12, W3/8, W1/2, 3/8 UNC & 1/2 UNC mild steel and stainless steel hooker rod (all thread).

This unit features a locking pins system that enables the user to switch and change cutting dies in a matter of seconds. This unit is designed & precision manufactured in Japan to the highest of international standards for the global construction market.

For more information on our entire hydraulic tool range please find us here at; www.stainelec.com.au

For more on this follow the link below

https://www.applianceoutletservice.com/appliance-care-tips/refrigerator-tips/where-to-set-your-refrigerator-temperature.htm

Short video telling you what temperature you should set your refrigerator and freezer at. The factory setting on your refrigerator should bring your refrigerator close to the 0 and 37 mark.

Best thing you should do is get a couple thermometers and place one in the fridge and one in the freezer and monitor the temps. Make minor adjustments as needed to get the refrigerator close to the desired temperature.

Allow 24 hours between each adjustment.