factory customized Carbon Steel to Jamaica Factory

G’day Guys,
Just a short video on how to make a bender for hairpin legs. All the materials are from my scrap bin or from the local scrap metal yard.
I don’t really have any measurements because I just winged it as I went along. The solid round bar is about 25mm (1 inch) diameter and about 50mm (2 inches) long.
I can bend 8mm and 10mm rod with this bender.

You can find my video on making Hairpin Legs with this bender here: https://youtu.be/h6tKW-v-Zn8

Feel free to leave a comment below if you have any questions.

Please subscribe to my channel to see more:

https://www.youtube.com/channel/UCcPwCYpY20mEemzYmhWqhPw?sub_confirmation=1

https://www.h-stone.it/en/hstone-mods-2/

PLUS + TXXII
Materials:
Body and cap: 316 L light Brushed Finish
Central post: ERGAL 7075 with anti coriosone and conductivity (Platinum / Rodeatura)
Screws tightening negative: Screw M2.5 AISI 316 dome head socket head 2
Tank: borosilicate glass (Pyrex) with cutting ribruciato / AISI 316 L (optional)
Insulator: PEEK (neutral color) high mechanical
Package Content:
Atomizer genesis PLUS + TXXII complete basic insulating pre-assembled and pre-assembled O-rings
Single coil cap
2x rounded socket head screws
2x wheat m2
3x O-ring parts
2x insulating attack 510
Engraving Lasr logo HSTONE MODS
Certificate authenticity
Box Packaging HSTONE MODS

If you want to leave a comment then please do so here

https://www.toddsreviews.com/

https://www.facebook.com/toddsreview

https://thevapersshed.boards.net/

PLEASE, remember these are just my opinions, I am just some bloke in a shed with a webcam after all, so I would strongly advise that you research everything before you buy, never go off just my opinion, read and view as many reviews as you can.

So in short, don’t get upset just because my opinion is not the same as yours!

Ensure that you check your resistances and batteries before firing any device, vaping safety must always be your first priority.