Factory directly provide STEEL DISC for Canberra Manufacturers
Short Description:
Diameter up to 1.200 mm (smaller dias correspondingly thicker) Thickness up to 600 mm
Factory directly provide STEEL DISC for Canberra Manufacturers Detail:
Diameter | up to 1.200 mm (smaller dias correspondingly thicker) |
---|---|
Thickness | up to 600 mm |
Product detail pictures:
Factory directly provide STEEL DISC for Canberra Manufacturers, The product will supply to all over the world, such as: , , ,
https://www.etrailer.com/Pro-Series/49569.html
Today on this 2012 Toyota Tacoma were going to install Weight Distribution part number 49569. All right, first thing were going to do to start off well go ahead and get our trailer level and well record the distance from the ground to the top of the coupler. Every trailer is going to vary, but in this case were working with 22 inches.All right, next well go ahead and attach our hitch ball to the ball mount. In this case well be using the 2-5/16 ball and then well install the ball. Now we dont have a bench vise to install the ball, so what were going to do is take the drawbar, put it in sideways and loosely install the ball mount. With extra set of hands, well go ahead and tighten down the ball and well torque it as specified in the instructions.Next well go ahead and take the drawbar and install it correctly into the hitch of the truck.
Note: Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Please check out the welding videos on this channel. Thanks for watching. https://www.6061.com
-Shape with 80-120 grit
-Semi-polish with medium woven belt
-Polish with stiff buffing wheel (use stainless polishing compound)
-Wipe clean before installing
By from -
By from -