factory low price STEEL BLOCK Export to Bahrain
Short Description:
Length max. 6.000 mm Width max. 1.800 mm Thickness max. 1.000 mm (in case of smaller thickness greater length and width) Weight max. 30.000 kg
factory low price STEEL BLOCK Export to Bahrain Detail:
Length | max. 6.000 mm |
---|---|
Width | max. 1.800 mm |
Thickness | max. 1.000 mm (in case of smaller thickness greater length and width) |
Weight | max. 30.000 kg |
Product detail pictures:
factory low price STEEL BLOCK Export to Bahrain, The product will supply to all over the world, such as: , , ,
Metalwork | Modern technology of steel rolling mill – Technology solutions.
Rolling, in technology, the principal method of forming molten metals, glass, or other substances into shapes that are small in cross-section in comparison with their length, such as bars, sheets, rods, rails, girders, and wires. Rolling is the most widely used method of shaping metals and is particularly important in the manufacture of steel for use in construction and other industries. Rolling may be done while the steel is hot (hot-rolling) or cold (cold-rolling). The process consists of passing the metal between pairs of rollers revolving at the same speed but in opposite directions and spaced so that the distance between them is slightly less than the thickness of the metal. The degree of change that can be made in the thickness of the steel depends on its temperature, with higher heat increasing the plasticity of the steel. Cold-rolling, in which unheated bars, sheets, or strips of steel are sent through the rollers, usually requires several rollings to achieve the desired shape. Cold-rolling often follows hot-rolling and is done to gain better mechanical properties, better machinability, special size, a bright surface, or a thinner gauge than hot-rolling can.
https://bit.ly/HPtQkQ – Watch Dave explain why G2 Chromoly Rear Axle Shafts outperform inferior axle shafts
Request Your Free Jeep Parts Catalog from 4WD:
https://jo.my/4wd_jeep_parts_catalog
By from -
By from -