Factory making STEEL TUBE to Australia Importers

Short Description:

Inner diameter 160 mm to 600 mm Length up to 1,200 mm Weight up to 10.000 kg


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
Factory making STEEL TUBE to Australia Importers Detail:

Inner diameter 160 mm to 600 mm
Length up to 1,200 mm
Weight up to 10.000 kg

Product detail pictures:

Factory making
 STEEL TUBE to Australia Importers detail pictures


Factory making STEEL TUBE to Australia Importers, The product will supply to all over the world, such as: , , ,


  • What is ALUMINIUM ALLOY? What does ALUMINIUM ALLOY mean? ALUMINIUM ALLOY meaning – ALUMINIUM ALLOY definition – ALUMINIUM ALLOY explanation.

    Source: Wikipedia.org article, adapted under https://creativecommons.org/licenses/by-sa/3.0/ license.

    Aluminium alloys (or aluminum alloys; see spelling differences) are alloys in which aluminium (Al) is the predominant metal. The typical alloying elements are copper, magnesium, manganese, silicon, tin and zinc. There are two principal classifications, namely casting alloys and wrought alloys, both of which are further subdivided into the categories heat-treatable and non-heat-treatable. About 85% of aluminium is used for wrought products, for example rolled plate, foils and extrusions. Cast aluminium alloys yield cost-effective products due to the low melting point, although they generally have lower tensile strengths than wrought alloys. The most important cast aluminium alloy system is Al–Si, where the high levels of silicon (4.0–13%) contribute to give good casting characteristics. Aluminium alloys are widely used in engineering structures and components where light weight or corrosion resistance is required.

    Alloys composed mostly of aluminium have been very important in aerospace manufacturing since the introduction of metal-skinned aircraft. Aluminium-magnesium alloys are both lighter than other aluminium alloys and much less flammable than alloys that contain a very high percentage of magnesium.

    Aluminium alloy surfaces will develop a white, protective layer of aluminium oxide if left unprotected by anodizing and/or correct painting procedures. In a wet environment, galvanic corrosion can occur when an aluminium alloy is placed in electrical contact with other metals with more positive corrosion potentials than aluminium, and an electrolyte is present that allows ion exchange. Referred to as dissimilar-metal corrosion, this process can occur as exfoliation or as intergranular corrosion. Aluminium alloys can be improperly heat treated. This causes internal element separation, and the metal then corrodes from the inside out.

    Aluminium alloy compositions are registered with The Aluminum Association. Many organizations publish more specific standards for the manufacture of aluminium alloy, including the Society of Automotive Engineers standards organization, specifically its aerospace standards subgroups, and ASTM International.


    5 Stars By from -

    5 Stars By from -

    Related Products

    WhatsApp Online Chat !