Factory supplied STEEL RING for Orlando Manufacturers
Short Description:
Outer diameter up to 2.400 mm Height up to 2.200 mm Weight up to 25.000 kg
Factory supplied STEEL RING for Orlando Manufacturers Detail:
Outer diameter | up to 2.400 mm |
---|---|
Height | up to 2.200 mm |
Weight | up to 25.000 kg |
Product detail pictures:
Factory supplied STEEL RING for Orlando Manufacturers, The product will supply to all over the world, such as: , , ,
PIERCING APPLICATOR 1.5″ NH (38mm) hardened tool steel point for driving through concrete block, mobile homes, and places where water and foam need to get. Flows 95 gpm at 100 psi (360 l/min @ 7 bar) with impinging jets for dense fog pattern. Ideal for use with Class A and AFFF foams. Dimension: 1.5″ x 51.5″ (3.8cm x 130.8cm) 1.5″ NH thread only.
CELLAR “DISTRIBUTOR” NOZZLE” 2.5″ NH (65mm) FEMALE INLET for reaching fires in hard to get at places. Ball bearing revolving action with rigid chromed brass base. Nine (9) varying angled discharge orifices, three (3) reaction and six (6) radial. Flows 280 gpm at 100 psi and 198 gpm at 50 psi (1060 l/min @ 7 bar and 750 l/min @ 3 bar). 2.5″ NH (65mm) thread and metal protection cage is standard. Available in 2.5″ NH thread only.
WATER CURTAIN 2.5″ NH (65mm) INLET & OUTLET Water curtain: 35′ width & 20′ height. (10.7m x 6.1m) Swivel joint allows curtain to be directed in relationship to the hose line. Flow rate: 100 gpm at 100 psi (380 l/min @ 7 bar). 2.5″ NH (65mm) female swivel inlet and 2.5″ (65mm) male outlet with end cap and chain. End cap can be removed to allow the use of multiple units on one hose lay. Available in 2.5″ NH thread only.
By from -
By from -