Factory Wholesale PriceList for STEEL SHAFT for European Factory
Short Description:
Barrel/flange diameter up to 1.600 mm Ø Length up to 15.000 mm Weight from 10 kg to 35.000 kg
Factory Wholesale PriceList for STEEL SHAFT for European Factory Detail:
Barrel/flange diameter | up to 1.600 mm Ø |
---|---|
Length | up to 15.000 mm |
Weight | from 10 kg to 35.000 kg |
Product detail pictures:
Factory Wholesale PriceList for STEEL SHAFT for European Factory, The product will supply to all over the world, such as: , , ,
DENN MANUFACTURING:
This is a CNC operated 3 roller flowforming/spinning machine. The machine is capable of spinning both forged and cast preforms and pancakes for both Al and Mg alloys. A fully robotized loading/unloading bay is available for optimal production integration.
The unit is equipped with an interface that is “plug and play” with all other hardware of the production unit such as the rotoforging press and the loading/unloading robots.
SPINNING CAST PREFORMS:
On the cast preforms both the inner and outer rims are spun fully automatically and the whole process is finished in 30 seconds.
Since the material on the rims is spun, the actual weight of the cast preform can be optimized, reducing its weight and the used raw material.
Another advantage is that different wheel widths can be spun from one preform using the excess material from the blank. In this case the inventory of blanks is reduced since one blank can be used for different wheel sizes. Typically tooling would need to be developed to cast each individual wheel size as well as inventory that needs to be planned for each wheel size.
SPINNING FORGED PANCAKES:
In the initial operation the rotoforged pancake or disk is first split and then the inner and outer rims and tire beads are spun. This is done in one operation without removal of the wheel from the machine.
The rotoforged pancakes can be used for different wheel sizes reducing the inventory of blanks.
SPINNING FORGED PREFORMS:
When using rotoforged preforms, typically the form and weight of the preform will be engineered for optimal spinning one wheel size. When using these preforms the spinning cycle in the machine can be reduced since the splitting operation is not needed. Using rotoforged preforms is the best solution for mass production and high volume of single size/specification wheels.
Further information: edbconsulting@scarlet.be
By from -
By from -