Free sample for STEEL BLOCK to Moscow Manufacturer
Short Description:
Length max. 6.000 mm Width max. 1.800 mm Thickness max. 1.000 mm (in case of smaller thickness greater length and width) Weight max. 30.000 kg
Free sample for STEEL BLOCK to Moscow Manufacturer Detail:
| Length | max. 6.000 mm |
|---|---|
| Width | max. 1.800 mm |
| Thickness | max. 1.000 mm (in case of smaller thickness greater length and width) |
| Weight | max. 30.000 kg |
Product detail pictures:
Free sample for STEEL BLOCK to Moscow Manufacturer, The product will supply to all over the world, such as: , , ,
This is one way to cut an internal keyway with a lathe. This is a good option if you need to make an internal keyway but do not have a broach set. In this video I cut a 3/16 square keyway in an aluminum bushing. I used a 1/2″ internal boring bar with a 3/16 HSS tool bit set up in the QCTP. The carriage was used to move the tool bit in and out of the aluminum bushing until the desired dept was reached.
If you liked this video please rate and subscribe.
Music is royalty free from Dread Pirates.
Thanks — TheManFromAlaska
By from -
By from -
