Lowest Price for ROUND BAR for Mauritania Importers
Short Description:
Length Up to 16,000 mm Diameter Max 1,200 mm
Lowest Price for ROUND BAR for Mauritania Importers Detail:
Length | Up to 16,000 mm |
---|---|
Diameter | Max 1,200 mm |
Product detail pictures:
Lowest Price for ROUND BAR for Mauritania Importers, The product will supply to all over the world, such as: , , ,
How to drill mild steel bar with TTP Hard Drills Cobalt Drill Bits and Cut It drill cooling paste
For larger holes drill a ‘pilot’ hole first (3 or 4mm is ideal), then change to larger bit. If you require a hole of around 12mm it may be easier to use an intermediate size like an 8mm first.
Drilling steel with TTP Hard Drills and using a cooling paste
TOP TIPS ON HOW TO DRILL STEEL
1. Use a vise or other method to secure the metal you will be drilling.
2. Hole Punch ensures an accurately locate hole and eliminates the possibility of the drill slipping.
3.Buy the best drill bits you can justify
4.Identify Metal properties before drilling
5. Use Cutting Paste or other lubricant to dissipate heat from the drill tip,
5. Safety goggles (not glasses) must be worn to prevent slivers of metal entering your eyes
6. Drill slowly
7.As your drill breaks through the far side ease up on pressure to prevent the drill bit ‘grabbing’
8.On harder Metals do not force the drill bit into the metal as this may cause excessive friction and heat to be generated reducing efficiency of drill bit – instead ease off pressure, use lubricant / cooling paste and reduce speed.
9.For larger holes drill a ‘pilot’ hole first (3 or 4mm is ideal), then change to larger bit. If you require a hole of around 12mm it may be easier to use an intermediate size like an 8mm first.
10. Drill a short distance then remove the drill bit from the hole, this will help remove cut metal, add lubricant before progressing.
SAVE 20% use code TRADE20
VISIT
USA SALES – www.ttp-hard-drills.net
Europe – www.ttp-hard-drills.com
By from -
By from -