OEM Factory for STEEL RING to Bolivia Factories
Short Description:
Outer diameter up to 2.400 mm Height up to 2.200 mm Weight up to 25.000 kg
OEM Factory for STEEL RING to Bolivia Factories Detail:
| Outer diameter | up to 2.400 mm |
|---|---|
| Height | up to 2.200 mm |
| Weight | up to 25.000 kg |
Product detail pictures:
OEM Factory for STEEL RING to Bolivia Factories, The product will supply to all over the world, such as: , , ,
https://www.learningconstruction.com
After you have excavated your footing, you need to layout the rebar or reinforcing steel in the footing.
Our recommended steps:
1. Layout the bars before you tie them together.
2. Install the lower mat first. Then raise the steel mats 3″ of the ground with dobies.
3. Install the upper mats or vertical dowels.
4. Install all your embeds such as j-bolts, rods and vertical dowels.
Tips:
1. Make sure that you follow the structural drawings for placement and overlap.
2. All steel must be at least 3″ away from the soil. Make sure they are not touching.
3. Do not use dobies or shims made out of wood. Use concrete or masonry dobies, or even bricks will work.
4. Don’t forget to keep checking our site!
By from -
By from -
