One of Hottest for STEEL PLATE to United States Factories

From 30 x 25 mm to 2.000 x 600 mm
(in case of a smaller width correspondingly thicker)

▒ Straight Side Hot Forging Press
JFP Series 600 | 750 | 1000 | 1350 | 1600 | 2000 | 2500 | 3000 | 4000

Slide adjustment device, stick release device and upper knock out device for higher productiving and work efficiency are selected to suitable model

Slide adjustment & Automatic stick release device

Slide adjustment device that attached to the side is operated easily by hydraulic motor. It can adjust with one touch digital memory and has overload protecter function. Stick release device is doing stick relief easily by operating cylinder and lever.

Hydraulic upper knockout device

Make up for durability and control problem in the mechanical type and as progress of work, Control is easier than mechanical type.

HIGH RIGIDITY FRAME MAIN BODY

It is combination of molding and steel structure. That protects transformation and unlimited life over 1600Ton and wide type press machines are divided upper and lower frame. A lower frame is manufactored
by casting. It sets up tie load within Hydraulic pressure. A Bodydie welds with high tension SUS for protect transformation and corrosion

BRAKE

It is excellent in braking power by virtue of space for stopping torque. By adoption of spring there
is no change in level of strength. By means of cooling disk heat generation is minimized and lining
is insert type so maintenance is simple.

EASY TOUCH SCREEN PANEL

It is excellent in braking power by virtue of space for stopping torque. By adoption of spring there is no change in level of strength. By means of cooling disk heat generation is minimized and lining is insert type so maintenance is simple.

CLUTCH

It is excellent in braking power by virtue of space for stopping torque. By adoption of spring there is no change in level of strength. By means of cooling disk heat generation is minimized and lining is insert type so maintenance is simple.

OIL LUBRICATION DEVICE

Oil lubrication is circulating and re-use type. In order to maintain cleanliness storage is made after filtering and then reused.

SLIDE

By broadening area of connecting rod and length and area of guide side relative to conventional machine it is safe even under eccentric load and overload. Guide side is heat-treated for prevent damage and wearing.
Types of 1600 tons or above and wide types are manufactured in double connection rod.

■ Adoption of wide area for a variety of works
■ By employing double con’rod is safe even under eccentric load and overload
■ Slide that made by alloy casting is heat-treated for preventing damage and mearing of slide, connecting rod

SAFETY DIAGNOSTICATION FUNCTION

It protects heating problem with crank shaft oil amount sensing. Also can against problems with message and alarm signal.

ANTI-CORROSION BODYDIE

Corrosion under scale is not appears by interception device

OCTABEDRAL SLIDE GUIDE

Corrosion under scale is not appears by interception device

Bed

■ Bed that made by casting is heat-treated for preventing
■ The useful structure for variety of progress
■ Wide area of legs prevent vibration by shock
■ Prevent corrosion and transformation by suface welding of high tensile SUS (option)

▶ STANDARD ACCESSORIES

■Slide Adjustment Device
■ Control Device of Preceiving Heat
Device
■ Lubrication Device
■ Upper/Lower Ejectors
■ Flow Monitor

▶ OPTIONS

■Die Set
■ Q.D.C Devices
■ Load Controller
■ Auto Loader Device
■ Auto Transfer Device
■ Mold Lifter Device
■ Anti-Vibration Device

FLYWHEEL BRAKE
Control of slide speed reduces
the mold setting time and
prodctivity is improving
HYDRAULIC MOTOR TYPE
SLIDE ADJUSTMENT DEVICE
(REAR SIDE)
Digital encorder controls
amount of adjustment

AUTO STICK RELEASE DEVICE
(FRONT SIDE)
Auto stick release device
protects machine from overload

TIE-ROD WITH BUILT IN HYDRAULIC SYSTEM

They are tightly fastened together with tierods by high-hydrauric, The frame also is of sturdy constrnction witch enable the accruacy of a forged product to be strictly maintained and stick releasing procedure is easily made

Jonathan,lee(jonathanwide@gmail.com)