Online Manufacturer for STEEL RING for Belgium Manufacturer
Short Description:
Outer diameter up to 2.400 mm Height up to 2.200 mm Weight up to 25.000 kg
Online Manufacturer for STEEL RING for Belgium Manufacturer Detail:
Outer diameter | up to 2.400 mm |
---|---|
Height | up to 2.200 mm |
Weight | up to 25.000 kg |
Product detail pictures:
Online Manufacturer for STEEL RING for Belgium Manufacturer, The product will supply to all over the world, such as: , , ,
Watch more Closets, Storage & Organizers videos: https://www.howcast.com/videos/123230-How-to-Install-a-Clothing-Rod
Don’t pay a handyman to do this simple job—learn how to become handy yourself!
Step 1: Identify wall substance
Identify what kind of wall will hold the rod—drywall, masonry, or concrete.
Step 2: Mark location
Figure out where you want to hang the rod, and mark the points with a pencil.
Tip
Have someone hold the clothing rod in different locations to determine the ideal place to install it.
Step 3: Center the rod
Take one of the two clothing rod holders that come with the rod and center it on the mark you made on the wall.
Tip
Some rods come with the ends built-in already.
Step 4: Mark screw holes
With your pencil, mark the position of the screw holes where your rod holders or ends will go.
Tip
Make sure your clothing rod holder is aligned correctly. There’s usually an opening on one side of the clothing rod holder that needs to point upward.
Step 5: Drill pilot holes
Drill pilot holes into the marks you made that correspond with the screw holes. These holes should be slightly larger than the screws you will use.
Step 6: Insert anchors
Insert the wall anchors into the holes.
Step 7: Attach rod holder
Use the screws to attach the clothing rod holder to the wall.
Step 8: Level the rod
Hold the rod up to the first holder you’ve attached and mark the location where the screws on the other end will go.
Tip
Use a leveler to make sure the clothing rod will be straight.
Step 9: Attach second rod
Drill holes, install anchors, and attach the second clothing rod holder to the opposite wall.
Step 10: Slide rod into holders
Install the clothing rod into the holders. It should slip neatly into the holders from above.
Did You Know?
The closet in Mariah Carey’s Manhattan penthouse is 3,000 square feet!
By from -
By from -