Quality Inspection for STEEL RING to Porto Manufacturers
Short Description:
Outer diameter up to 2.400 mm Height up to 2.200 mm Weight up to 25.000 kg
Quality Inspection for STEEL RING to Porto Manufacturers Detail:
| Outer diameter | up to 2.400 mm |
|---|---|
| Height | up to 2.200 mm |
| Weight | up to 25.000 kg |
Product detail pictures:
Quality Inspection for STEEL RING to Porto Manufacturers, The product will supply to all over the world, such as: , , ,
This will be a pin for an oil rig crane made from EN19 steel original weight (before turning) around 250 Kg. It was done on my works lathe (Dean Smith & Grace) over a period of 2 days started at 210 mm Diameter and small end finishes at around 60mm and large end finishes at around 180mm…removes about 5/8 ths of the bar weight when done!!! finishes about 95 Kg!!! (Still wouldn’t want to be in front of it if it comes out of the chuck at 220 RPM though!!) As for the chips coming off the bar…well if they hit your skin THEY STICK!!! and I have the scars to prove it!
the square wire making machine is used to make the round wire coil into square steel bar in certain length. the square bar size is 12*12mm
By from -
By from -
