Renewable Design for STEEL BLOCK to Puerto Rico Importers
Short Description:
Length max. 6.000 mm Width max. 1.800 mm Thickness max. 1.000 mm (in case of smaller thickness greater length and width) Weight max. 30.000 kg
Renewable Design for STEEL BLOCK to Puerto Rico Importers Detail:
| Length | max. 6.000 mm |
|---|---|
| Width | max. 1.800 mm |
| Thickness | max. 1.000 mm (in case of smaller thickness greater length and width) |
| Weight | max. 30.000 kg |
Product detail pictures:
Renewable Design for STEEL BLOCK to Puerto Rico Importers, The product will supply to all over the world, such as: , , ,
The key to this jig is a piece of 1/8″ square wire, which is roughly centered on the outside of the jig. The wire could actually be round and anywhere from 1/8″ to 3/16″ for this job. The idea is to push the inside wall of the tubing in, and once it’s going the right direction, it will take care of itself. Without the wire or something even more elaborate, you won’t be able to bend this material tighter than about 15″ radius without kinking.
If you look closely, you might notice that the straight part of the tube that I’m bending from ends up slightly curved also. If this is a problem, you can overbend the material slightly, and then carefully unbend the side that you used as a lever. But if it has to be perfect, then go buy a big expensive machine.
Oh, and doing this sort of thing is why I now have arthritis.
For more info on hand bending, see https://www.metalgeek.com/bend
www.keensaw.com
Tel: 0086 15921041161
Contact: Dennis
Our chamfering machine, chamfer machine is based on good quality and competitive price, we have been in this field for about 8 years, with quite full experience, also with excellent after-sales service, sincerely hope we can help you on your business. welcome for your inquiry.
By from -
By from -
