Some time ago I’ve made a small steel mold for casting ingots and now decided to make a second one. This one will be much bigger. When it’s ready it will be possible to cast lead, aluminum, brass, bronze and copper. Such steel molds are very important because when you made your home foundry, bought or made a crucible and ready to melt some metal you find out that you don’t have where to pour molten metal. If you use green sand casting or lost foam casting that’s fine but it’s much easier to do all this from ingots and not “dirty” alloy scrap.
For this mould I took U-Section and cut off a piece of it. It’s important to make right angles, so it will be much easier to extract ingots.
After this I sanded a rusted sheet and cut off two pieces which would be used as long sides of the mold.
The next step was to weld all sides together. When it was done, I cut off a piece of rod and welded it to the mold. The final stage was to cover inside surface with slack lime. It will help to extract bar after it becomes solid.
Post time: Jul-03-2017